D3.3xL6.5m Pneumatic Fenders with chain & tyre net;  Yokohama Pneumatic Fenders8pcs were delivered to Europe; With BV certificate. Pneumatic fender is made of the synthetic-cord-reinforced rubber sheet with compressed air inside, at an initial pressure of 50kpaor 80kpa to enable it to float on the water and work as a bumper between two ships, or…

D1.5xL2.5m Pneumatic Fenders with chain&tyre net; Yokomaha Fenders4pcs were delivered to Europe. Pneumatic Fender Constructions: The pneumatic fender is constructed of an inner rubber, synthetic-tyre-cord layer and outer rubber. All of those shall be vulcanized firmly and proven by compress test. Outer rubber layer covers the outside of the fender to protect the cord layers…

Triple Roller Rubber Fenders, 6 sets delivered to Europe.Painted with polyurea on the roller as the client requests. Which is used for the yacht. Features for Roller Fenders: The main character of the roller fender is the fender will roller with ship movement, and has deflection to absorb the energy of ship impacting. Low reaction…

8pcs MV1450x900mm Rubber Fenders delivered to Korea MV fenders were called Leg fenders, element fenders as well, which are often used with frontal panels together. The equipped frontal panel can greatly reduce the hull pressure. Various installation ways to satisfy port structure requirements. Compression tests must be carried out before delivery.

Frontal panels used for cone fenders H1050; Size: 1000x1500x200mm, 20 sets, delivered to KoreaUHMW-PE face pad is for rubber fender use. Various colors are available for the face pad. Frontal panels are often welded of steel Q345B, finished with epoxy zinc rich paint. Each frontal panel will be tested strictly before delivery.Normally the tests includes:…

MV Rubber Fenders Size H750xL1500mm, 14pcs; Delivered to Europe MV fenders were named Leg fenders, element fenders as well, which are often used with frontal panels together. The equipped frontal panel can greatly reduce the hull pressure. Various installation ways to satisfy port structure requirements. a compression test must be carried out before delivery.

MV rubber fenders 6pcs 1000x1500mm & 4pcs 1250x2000mm;4pcs 550x1500mm &2pcs 550x1000mmDelivered to Korea The MV fenders were named Leg fenders, element fenders as well, which are often used with frontal panels together.  The equipped frontal panel can greatly reduce the hull pressure.  Various installation ways to satisfy the port structure requirement. A compression test must be carried out before…

Frontal panel used for cone fender H600, size 2600x1000x200mmUHMW-PE face pad is specialized for rubber fender use.Various colors are available for the face pad. Frontal panels are often welded of steel Q345B, finished with epoxy zinc-rich paint. Each frontal panel will be tested strictly before delivery.Normally the tests includes: MT, dimensional checking, material report, painting…